Electrical Work and Why Competence Matters
Electrical installation is the one trade where a mistake can be immediately life-threatening and where much of the work is hidden behind plaster. In England, a substantial amount of domestic electrical work falls under building regulations and must either be carried out by a registered competent person or notified to building control. Choosing a properly registered contractor is not bureaucracy; it is the only practical way to know the work is safe and certificated.
Demand in Chorley has grown considerably, driven by older properties needing rewires, electric vehicle charger installations across residential estates, solar and battery storage, and the electrification of heating.
What to Check Before Hiring
Confirm registration with a recognised competent person scheme and ask which scheme, since you can verify it independently. Ensure the contractor will issue an Electrical Installation Certificate or Minor Works Certificate on completion. Check they carry public liability insurance, and ask whether they use calibrated test equipment with current certification. A contractor who cannot answer these questions comfortably is not the right choice.
1. Chorley Electrical Contractors
A registered contractor covering full and partial rewires, consumer unit upgrades, fault finding, lighting installation and periodic inspection. Chorley Electrical Contractors issues full certification on every job and provides clear written quotations itemising materials and labour. Their fault diagnosis capability is particularly well regarded by local landlords and letting agents.
2. Lancashire Electrical Testing
Specialising in inspection and certification, this firm carries out Electrical Installation Condition Reports, portable appliance testing, emergency lighting testing and fire alarm system inspection. Lancashire Electrical Testing serves landlords meeting mandatory rental safety requirements as well as commercial premises with statutory obligations, and their reports are clear and properly coded.
3. Buckshaw EV Charging Installations
A dedicated electric vehicle infrastructure specialist installing home chargers, workplace charging points and small commercial arrays. Buckshaw EV Charging Installations assesses supply capacity properly, advises on load management where the incoming supply is limited, and handles network operator notification. Their advice on tariff-linked smart charging genuinely reduces running costs.
4. Euxton Commercial Electrical Services
Serving businesses, this contractor handles three-phase installations, distribution boards, industrial machinery connection, LED lighting upgrades, data cabling and planned maintenance. Euxton Commercial Electrical Services works out of hours where required to avoid disrupting operations, and its lighting upgrade projects typically deliver quick payback through reduced consumption.
5. Ribble Renewable Energy Electrics
Focused on generation and storage, this firm installs solar photovoltaic arrays, battery systems, inverters, export metering and integration with heat pumps. Ribble Renewable Energy Electrics models expected generation and self-consumption before installation, so clients have realistic expectations rather than optimistic sales figures.
6. Coppull Domestic Rewires
Specialising in older properties, Coppull Domestic Rewires handles full house rewires, upgrading rubber and fabric-insulated cabling, replacing outdated fuse boards and improving circuit provision. Their approach minimises damage to plaster and decoration, which substantially reduces the cost of making good afterwards.
7. Astley Smart Home Systems
Integrating technology with electrical installation, this contractor fits smart lighting, automated heating controls, networked audio, door entry systems, and whole-home networking with reliable wired backbones. Astley Smart Home Systems focuses on robust, standards-based solutions rather than fragile consumer gadgets.
8. Withnell Rural and Agricultural Electrical
Covering farms and remote properties, this firm handles agricultural building installations, external supply distribution, standby generator connection, livestock building electrics and armoured cable runs. Rural installations face harsher conditions and different regulatory considerations, and the specialism shows.
9. Chorley Security and Fire Systems
Installing intruder alarms, CCTV, access control, fire detection and emergency lighting, this contractor covers both domestic and commercial premises. Chorley Security and Fire Systems designs systems to recognised standards, which matters for insurance validity and, in commercial settings, for statutory compliance.
10. Heath Charnock Electrical Repairs
Handling smaller works and urgent faults, this firm covers socket and switch replacement, lighting repairs, extractor fan installation, outdoor power and tripping circuit diagnosis. Fast response on modest jobs makes them a useful first call for everyday electrical problems.
Industry Trends
Electrification is expanding domestic electrical demand significantly. A home with an electric vehicle charger, a heat pump and an induction hob places far greater load on an installation than one designed decades ago, which is why supply capacity assessment and load management have become routine parts of the job.
Battery storage is growing rapidly, allowing households to shift consumption to cheaper overnight tariffs and store surplus solar generation. Arc fault detection devices and surge protection are increasingly specified as standard on new consumer units. Meanwhile, LED technology has effectively completed its takeover of lighting, with remaining upgrade activity now focused on controls and colour quality rather than efficiency alone.
Safety Advice for Homeowners
Have an Electrical Installation Condition Report carried out roughly every ten years in an owner-occupied home, and every five years in rented property where it is a legal requirement. Test residual current devices regularly using the test button. Avoid overloading extension leads, particularly with high-draw appliances. Replace any socket or switch showing scorching or warmth immediately, and treat repeated circuit tripping as a fault to be investigated rather than an inconvenience to be reset.
Final Thoughts
Chorley's electrical sector covers domestic rewiring, statutory testing, renewable generation, electric vehicle infrastructure, commercial installation and security systems. Registration and certification should be non-negotiable requirements, and the cheapest quotation is rarely the best value when hidden work is involved. Choose a registered contractor with relevant experience, keep your certificates safe, and your installation will remain both safe and compliant for decades.
Want your brand featured in front of decision-makers? Publish a guest post or get a link insertion in our guides through AAMAX's guest post and link insertion service.
Helpful Links
Write for Us
Share your expertise with our readers. We welcome guest contributions from industry specialists.
Pitch your idea


